The new AT antistatic Technology co-developed with Lucent Technologies was designed as a replacement for the Cryovac Technology. AT provides unequaled static dissipative protection in a clear film. AT has a long, stable life and is relatively unaffected by humidity and temperature variations. AT is designed for limited re-use as well as for one time use applications. Environmentally and worker friendly. Available as Film, Flat Bags or Zipper Closure Bags.

Ø Mil B-81075C Type ll material

Ø A long, stable ESD life - tested in both real time and accelerated conditions

Ø Electrical properties relatively unaffected by even low humidity levels

Ø Specially formulated to reduce anti-stat migration keeping AT contamination free

Ø Low Tribo electric charging on both quartz and Teflon

Ø Clean room compatible

Ø Static Decay of > .5 seconds

Ø AT is non-irritating to skin surfaces, making it operator friendly.

Ø AT is non-corrosive, meeting Mil Spec 101C, Method 3005

Ø AT does not contain any amines

Ø AT contains high strength and high tensile Linear Low Density Polyethylene

providing excellent puncture resistance as well as strong seals

Physical Properties Typical Values Test Method

Thickness 3 mils

Tensile Strength

Machine Direction 14.5 Lbs./in ASTM D882

Transverse Direction 12.0 Lbs./in ASTM D882

Elongation

Machine Direction 321 % ASTM D882

Transverse Direction 512 % ASTM D882

Puncture Resistance 9.0 Lbs. FTMS 101, MTH 2065

Dynamic Coefficient of Friction .27 (on own surface)

Heat Seal Strength 9.0 lbs/in Instron

Electrical Properties Typical Values Test Method

Static Decay Fed 101C, 4046.1

As received .11 seconds Mil 81705-C

After 24 Hour Water Shower 1.0 seconds Mil 81705-C

Chemical Properties Typical Values Test Method

Polycarbonate Compatibility Pass EIA 564

Corrosion Test

Steel Pass

Copper Pass